FETCh:ORFSpectrum
FETCh:ORFSpectrum:SWITChing[:ALL][:MAXimum]?
Function
Queries output RF spectrum due to switching (maximum) measurement results at all frequency
offsets currently turned on (there can be up to eight).
The
"SETup:ORFSpectrum:SWITching:FREQuency[:OFFSet]"
output RF spectrum due to switching offsets that are turned on and their frequency values. The
"SETup:ORFSpectrum:SWITching:FREQuency:POINts?"
spectrum due to switching points that are turned on, indicating the number of output RF
spectrum due to switching (max) values to expect when you FETCh results.
Range: −100 dBm to +100 dBm and 9.91 E+37
Query
Resolution: 0.01 dB
Programming Example
OUTPUT 714;"FETCH:ORFSPECTRUM:SWITCHING:ALL:MAXIMUM?"
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:ORFSpectrum:SWITChing[:ALL]:AVERage?
Function
Queries output RF spectrum due to switching (average) measurement results at all frequency
offsets currently turned on (there can be up to eight).
The
"SETup:ORFSpectrum:SWITching:FREQuency[:OFFSet]"
output RF spectrum due to switching offsets that are turned on and their frequency values. The
"SETup:ORFSpectrum:SWITching:FREQuency:POINts?"
spectrum due to switching points that are turned on, indicating the number of output RF
spectrum due to switching values to expect when you FETCh results.
Range: −100 dBm to +100 dBm and 9.91 E+37
Query
Resolution: 0.01 dB
Programming Example
OUTPUT 714;"FETCH:ORFSPECTRUM:SWITCHING:ALL:AVERAGE?"
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
326
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_orfspectrum.fm
command sets up the number of
queries the number of output RF
!Returns the ORFS due to
!switching (maximum)
!measurement results at
!all frequency offsets
!currently turned on.
command sets up the number of
queries the number of output RF
!Returns the ORFS due to
!switching (average)
!measurement results at
!all frequency offsets
!currently turned on.