Agilent Technologies 8960 10 Series Reference Manual page 447

Bit Binary
Number Weighting
2 4
1 2
0 1
Program Examples - STATus:OPERation:CALL:GSM
OUTPUT 714;"STATUS:OPERATION:CALL:GSM:EVENT?" !Queries the GSM Operation Call
OUTPUT 714;"STATUS:OPERATION:CALL:GSM:CONDITION?" !Queries the GSM Operation Call
OUTPUT 714;"STATUS:OPERATION:CALL:GSM:ENABLE 4" !Sets the GSM Operation Call
OUTPUT 714;"STATUS:OPERATION:CALL:GSM:NTR 4" !Sets the GSM Negative Transition
OUTPUT 714;"STATUS:OPERATION:CALL:GSM:PTR 256" !Sets the GSM Positive Transition
Condition
Call Control Status Connected
Call Control Status Idle
Extension Bit
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_status_operation.fm
This bit will be a 1 when the test set is in the call
connected state.
This bit will be a 1 when the test set is in the call
idle state.
This bit will always be 0.
!Event Register.
!Condition Register.
!Enable Register for bit 4.
!Register for bit 4.
!Register for bit 256.
STATus:OPERation
Description
447