Agilent Technologies 8960 10 Series Reference Manual page 312

FETCh:DPOWer
FETCh :DPOWer
"Diagram Conventions" on page 213
FETCh:DPOWer[:ALL]?
Function Queries the Dynamic Power measurement results. Query returns N integrity indicators and N
average TX power levels (where N is the number of bursts measured). To set the number of
bursts you want to measure, use
Query Integrity indicators for each individual burst
• Range: 0 to 16
• Resolution: 1
Average TX power levels for each individual burst
• Range: -100 to +100 dBm and 9.91 E+37 (NAN)
• Resolution: 0.01 dBm
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:DPOWer:INTegrity?
Function Returns N integrity indicators (where N is the number of bursts measured). To set the number of
bursts you want to measure, use
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[:ALL]
:INTegrity
:POWer
"SETup:DPOWer:COUNt:NUMBer" on page
"SETup:DPOWer:COUNt:NUMBer" on page
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_dynp.fm
? (returns N Integrity indicators, N Avg TX
Power levels (where N is the number of
bursts measured))
? (returns N Integrity indicators (where N
is the number of bursts measured))
? (returns N Avg TX Power levels (where N
is the number of bursts measured))
FETCh:DPOWer
404.
404.
312