Agilent Technologies 8960 10 Series Reference Manual page 304

FETCh:BERRor
FETCh:BERRor:COUNt:FE?
Function Queries the number of frames erased during a residual measurement type, looback type A test.
The manual user must set the measurement's unit to count.
Query Range: 0 to 19,980 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:COUNt:TYPEIA|TYPEIB|TYPEII?
Function Queries the number of bits in error. This query allows you to select the bit type you want to
query; either Type Ia, Type Ib or Type II. See
Query Range for Type Ia: 0 to 999,000 and 9.91 E+37 (NAN)
Range for Type Ib: 0 to 2,637,369 and 9.91 E+37 (NAN)
Range for Type II: 0 to 1,558,440 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:DELay?
Function Queries the delay (in speech frames) that the test set used during the last bit error measurement
to correlate uplink information bits with downlink information bits.
This value is displayed in the Speech Frames Delay field.
This value can be determined automatically, or manually set by the user. See
"SETup:BERRor:MANual:DELay" on page 389
388.
Refer also to the
and how it is used in the bit error measurement.
Query Range: 0 to 15 and 9.91 E+37 (NAN)
Resolution: 1
*RST Setting Auto
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
304
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_berror.fm
"Bit Error Measurement Description" on page 48
"Bit Error Measurement Description" on page 48
and "SETup:BERRor:LDControl:AUTO" on page
for a description of frame delay