Agilent Technologies 8960 10 Series Reference Manual page 410

SETup:IQTuning
SETup:IQTuning:TIMeout:STATe
Function Sets/queries the time-out state for the I/Q Tuning measurement.
Setting 0|OFF|1|ON
Query 0|1
*RST 0|OFF
Programming Example
OUTPUT 714;"SETUP:IQTUNING:TIMeout:STATE ON" !Sets the timeout state to
on for an I/Q Tuning measurement.
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
SETup:IQTuning:TIMeout[:STIMe]
Function Sets/queries the I/Q Tuning measurement time-out value in seconds and sets the time-out state
to on. The units (S|MS) are optional, if no units are specified then the default is S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST 10 seconds
Programming Example
OUTPUT 714;"SETUP:IQTUNING:TIMEOUT:STIME 3" !Sets the timeout state to on
and the timeout value to 3 seconds.
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
SETup:IQTuning:TIMeout:TIMe
Function Sets/queries the time-out value in seconds that is used for the I/Q Tuning measurements when
the time-out state is ON. The units (S|MS) are optional, if no units are specified then the default
is S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST 10 seconds
Programming Example
OUTPUT 714;"SETUP:IQTUNING:TIMEOUT:TIME 4" !Sets the timeout value to
4 seconds.
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
410
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_iq.fm