Agilent Technologies 8960 10 Series Reference Manual page 180

Step 4: Establish an Active Link with Mobile Station
Step 4: Figure 2. Process For Making A Mobile Station Originated Call
180
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step4.fm
Start
Set call state change
detector time-out time.
Arm call state change
detector.
Send call connected
state query command.
Originate a call from
mobile station.
Enter response from
call connected state
query.
Call connected?
Yes
Proceed with control
program.
No
Send CALL:END
command.
Invoke error
handler.