Agilent Technologies 8960 10 Series Reference Manual page 596

+200 to +299 Call Processing Device-Specific Error
Error Message
+219 GSM Call disconnected; Mobile not capable of
supporting the selected Channel Mode
+220 GSM call processing failure; (Call processing not
available
+230 GSM operation rejected; Call processing disabled
+231 GSM operation rejected; Attempting to set MCC
while generating a BCH
+232 GSM operation rejected; Attempting to set LAC
while generating a BCH
+233 GSM operation rejected; Attempting to set BCC
while generating a BCH
+234 GSM operation rejected; Attempting to set NCC
while generating a BCH
+235 GSM operation rejected; Attempting to set MNC
while generating a BCH
+236 GSM operation rejected; Only one call can be
supported at a time
+237 GSM operation rejected; Requested TCH Band is
invalid in current state
+250 GSM protocol failure; No response to disconnect
(Timer T305 expiry)
+251 GSM protocol failure; No response to release
(Timer T308 expiry)
+252 GSM protocol failure; Channel release failed
(Timer T3109 expiry)
+253 GSM protocol failure; (Timer T3270 expiry)
+254 GSM protocol failure; Unknown identity type
received from mobile
+255 GSM protocol failure; Unexpected identity type
received from mobile
+256 GSM protocol failure; Channel assignment
exceeded specified number of frames
596
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_pos200.fm
Description
Indicates that the mobile station cannot support the
requested channel mode.
Indicates the BS Emulator VI cannot be instantiated.
Indicates an attempt to perform a BS Emulator action
when the BS emulator VI is inactive.
Indicates that the Cell Activated State is still On. The
Cell Activated State must be turned Off before setting
the BCC.
Indicates that the Cell Activated State is still On. The
Cell Activated State must be turned Off before setting
the BCC.
Indicates that the Cell Activated State is still On. The
Cell Activated State must be turned Off before setting
the BCC.
Indicates that the Cell Activated State is still On. The
Cell Activated State must be turned Off before setting
the BCC.
Indicates that the Cell Activated State is still On. The
Cell Activated State must be turned Off before setting
the BCC.
Indicates an attempt at a second call being activated.
Indicates that there is not an active link between the
MS and the test set.
"Fixed Timer Messages" on page 578
"Fixed Timer Messages" on page 578
"Fixed Timer Messages" on page 578
"Fixed Timer Messages" on page 578
Indicates that an identity type other than 1, 2, 3 or 4
was received from the MS.
Indicates that the MS has responded with an
unexpected identity type. Example MS returned IMSI
when IMEI was queried.
See "CALL:MS:REPorted:IMEI?" on page
Indicates that the max frames allowed for assignment
parameter should be increased.
256.