Agilent Technologies 8960 10 Series Reference Manual page 569

Selecting a Radio Personality
Description
Different radio personalities, (such as GSM or AMPS/136) can be tested when the optional test application for
each radio personality is purchased from Agilent Technologies.
When the operations described in this section are queried, several seconds may pass before the information is
ready to be displayed.
You can query the current revision, the selected revision, all the revisions, and the total count of revisions for a
selected test application. These queries are helpful when changing revisions or loading new revisions. They
are not usually necessary when switching test applications.
The test application Setup menu will display all of the test applications available along with the selected
revision. The selected revision is the revision that would run if the test set was switched to that test
application. There is no need to select a revision every time you want to switch test applications.
Selecting the correct name and the desired revision of a test application is important. This
NOTE
information should be reviewed before proceeding.
Test Applications Switching
Selecting of a different test application is accomplished manually using the front panel keys, or remotely over
GPIB. The test set must be rebooted in order for the test application to become functional. The reboot will
happen automatically when the you tell the test set to switch test applications. Rebooting to another test
application takes about one minute.
Remote User In order to switch to another test application use this GPIB command:
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:NAME 'GSM MOBILE TEST'"
Sending this command will cause the test set to reboot.
Manual User Test application switching is found on the SYSTEM CONFIG screen.
To switch to the test application you have selected.
1. Press the Test Application key.
2. Use the knob or arrows to scroll to the test application you want.
3. Press the knob or enter key.
4. A menu will appear asking "Switch Now?" If you answer "No" nothing will change, if you answer "Yes" the
test set will reboot in the new test application.
Revision Selection
Different revisions of the test applications in your test set will provide different functionality. Switching
revisions does not reboot the test set in a new test application. It merely selects a revision for the next switch.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\conf_radio_personality.fm
Selecting a Radio Personality
569