Agilent Technologies 8960 10 Series Reference Manual page 551

Remote/Local Mode
Remote/Local Mode
Description
Remote Mode
When the test set is operated remotely, all of the keys on the front panel of the test set are disabled (except the
LOCAL key and the power switch). During remote operation the test set is controlled by the Remote User
Interface, (RUI).
Any open menus will be closed, and any manual entries will be aborted when the test set transitions from local
mode to remote mode.
The user will need to press the LOCAL key on the front panel in order to gain manual control of the test set, if
the test set is in remote mode.
The remote annunciator (R) will appear on the test set's display to indicate that the test set is in remote mode.
Local Mode
During local mode all front panel keys and the knob are enabled. During local operation the test set is
controlled by the Manual User Interface, (MUI).
The remote annunciator (R) is turned off when the test set is operated in local mode.
551
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\gen_remote_local.fm