Agilent Technologies 8960 10 Series Reference Manual page 461

STATus:QUEStionable:CALL:GSM Condition Register Bit Assignment
The STATus:QUEStionable:CALL:GSM registers will contain information about which event(s) occurred
during GSM call processing that indicate why the call processing procedure failed.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Call disconnected: Channel Mode
not supported
Identification failure
Channel Assignment exceeded
specified number of frames
Call disconnected: No Response to
Page
Call disconnected: Handover
Failure
Call disconnected: Channel
Assignment Failure
Call disconnected: Immediate
Assignment Failure
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_STATus_QUEStionable.fm
Description
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit will always be 0.
This bit is a 1 if the mobile station is not capable of
supporting the selected channel mode.
This bit is a 1 if the identity request timer (T3270)
has expired. The timer expires if the mobile does not
respond to identity request message, within
5 seconds.
This bit is a 1 if the channel assignment exceeded
the specified number of frames.
This bit is a 1 if the paging timer (T3113) has
expired. The timer expires if the mobile does not
respond to a paging request message, within
5 seconds.
This bit is a 1 if the physical information timer
(T3105) has expired. The timer expires if the mobile
does not respond to a physical information message,
within 50 ms.
If the timer has expired and correctly decoded data
or a TCH frame has not been received, newly
allocated channels are released.
This bit is a 1 if the channel assignment timer
(T3107) has expired. The timer expires if the mobile
does not respond to an assignment command
message within 3 seconds.
This bit is a 1 if the immediate assignment timer
(T3101) has expired. The timer expires after
1 second if a signaling link is not established when
an immediate assignment or immediate assignment
extended message is sent.
If the timer expires, newly allocated channels are
released.
STATus:QUEStionable
461