Agilent Technologies 8960 10 Series Reference Manual page 303

FETCh:BERRor:BITS:TYPEIA|TYPEIB|TYPEII?
Function Queries the number of bits which have been tested. This query allows you to select the bit type
you want to query; either Type Ia, Type Ib or Type II. See
on page 48
Query Range for Type Ia: 0 to 999,000 and 9.91 E+37 (NAN)
Range for Type Ib: 0 to 2,637,369 and 9.91 E+37 (NAN)
Range for Type II: 0 to 1,558,440 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:COUNt[:BITS]?
Function Queries the number of bits that were in error during the last bit error test. See
Measurement Description" on page 48
The manual user must set the measurement unit to count.
Query Range: 1 to 999,131 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:COUNt:CRC?
Function Queries the number of bad cyclic redundancy checks (CRCs) for a non-residual measurement
type, loopback type B test. See
The mobile station re-transmits the CRC it received from the test set on the uplink.
A bad CRC occurs when the CRC transmitted by the test set does not match what is received
back from the mobile station.
The manual user must set the measurement unit to count.
Query Range: 0 to 19,980 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
"Bit Error Measurement Description" on page 48
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_berror.fm
"Bit Error Measurement Description"
"Bit Error
FETCh:BERRor
303