SYSTem:CONFigure
SYSTem
:CONFigure
"Diagram Conventions" on page 213
SYSTem:CONFigure:INFormation:HARDware:VERBose?
Function
Queries the manufacturer, model number, model number of the test application running, serial
number, revision, board ID, and cal file information. The information provided by the query
represents the configuration that existed when the test set was powered up. For an example of
how to use this command, see
*RST Setting
Resets have no effect on this information. The information is gathered during the power up cycle.
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Related Topics
***********************************************************************************
"Hardware Configuration Report" on page 562
"SYSTem:CURRent:TA" on page 487
"Obtaining Test Application Information" on page 567
"Obtaining Identification Information *IDN?" on page 558
***********************************************************************************
:INFormation
:HARDware
"Hardware Configuration Report" on page
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_system_conf.fm
:VERBose?
(returns model number,
serial number, revision
number, board ID and
Cal file information)
SYSTem:CONFigure
562.
484