Calibration - Agilent Technologies 8960 10 Series Reference Manual

CALibration

April 30, 1999
CALibration
"Diagram Conventions" on page 213
CALibration:IQ[:1]?
Function Sets/queries the calibration of the IQ modulator for RF generator 1. It takes some time to
complete calibration and can't be aborted except by cycling the power switch.
• Calibrates the IQ modulator for RF generator 1.
• Returns a value indicating success or failure of calibration.
Query Range
• 0 = Pass
• −340 = Fail
Programming Example
OUTPUT 714;"CALIBRATION:IQ?" !Performs a calibration of the IQ modulator for
NOTE When the the calibration is done the test set display will display:
IQ Calibration completed successfully for modulator 1. Cycle power to continue.
? (returns 0 for pass or -340 for fail)
:IQ
[:1]
:IQ2? (returns 0 for pass or -340 for fail)
:DATE <sp><YYYY,MM,DD>
?
!RF generator 1 and returns a value indicating
!success or failure.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_calibration.fm
CALibration
224