Agilent Technologies 8960 10 Series Reference Manual page 562

Wireless communications test set, gsm mobile test application

Hide thumbs Also See for 8960 10 Series:

Table of Contents

Hardware Configuration Report

You can generate a list of the test set's hardware configuration over the LAN or GPIB. The report includes:

model number, serial number, revision number, board ID, and cal file information.

Connect the test set to the LAN and determine the LAN IP address. It can be found in the SYSTEM CONFIG

screen. Open a WEB browser. In the address field, enter the test set's LAN IP address, followed by the "iconfig"

LAN Example:

15.2.2.147/iconfig

Data from the GPIB query must be saved as html, and then read with a WEB browser in order for the

information to be presented in the same format as the LAN query.

GPIB Example:

DIM Buf1$[20000],Buf2$[20000] ! This is the minimum space for the arrays

OUTPUT 714;"SYSTEM:CONFIGURE:INFORMATION:HARDWARE:VERBOSE?"

ENTER 714;Buf1$,Buf2$

CREATE "HW.htm",1

ASSIGN @File TO "HW.htm"

OUTPUT @File;Buf1$,Buf2$

In the future, the hardware configuration report may increase in length. More space would then need to be

allocated for the arrays.

Table of Contents

Troubleshooting

E5515a E5515b E1960a