Agilent Technologies 8960 10 Series Reference Manual page 306

FETCh:BERRor
FETCh:BERRor:ICOunt?
Function Queries the intermediate count of bits tested (measurement progress report). See
"Measurement Progress Report" on page 131
Query Range: 0 to 999
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:INTegrity?
Function Returns the integrity indicator value for the last bit error measurement performed. Zero
indicates a normal result.
See "Integrity Indicator" on page 125
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:RATio[:BITS]?
Function Queries the ratio of bits in error to the number of bits tested during the last bit error test and
returns it as a percentage. See
The manual user must set the measurement unit to %.
Query Range: 1 to 100 and 9.91 E+37 (NAN)
Resolution: 0.01
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:RATio:CRC?
Function Queries the ratio of bad cyclic redundancy checks (CRCs) to the total number of CRCs received
for a non-residual measurement type, looback type B test and returns it as a percentage. See
Error Measurement Description" on page 48
The mobile station re-transmits the CRC it received from the test set on the uplink.
A bad CRC occurs when the CRC transmitted by the test set does not match what is received
back from the mobile station.
The manual user must set the measurement's unit to %.
Query Range: 0 to 100 and 9.91 E+37 (NAN)
Resolution: 0.01
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
306
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_berror.fm
for descriptions of non-zero integrity indicators.
"Bit Error Measurement Description" on page 48
"Bit