SETup:DAUDio:FILTer:STATe
Function
Selects/queries the Decoded Audio bandpass filter state. see
Description" on page 55
Setting
1|ON |0|OFF
Query
1|0
Programming Example
OUTPUT 714;"ABORT:ALL" !Aborts all active measurements in progress.
Programming Example
OUTPUT 714;"SETUP:DAUDIO:FILTER:STATE OFF" !Sets bandpass filter state to off.
SETup:DAUDio:TIMeout[:STIMe]
Function
Selects/queries the timeout value in seconds that will be used for Decoded Audio measurements.
This command sets the timeout state to ON. The units (S|MS) are optional, if no units are
specified then units default to S.
Setting
Range: .1 to 999 / Resolution: .1
Query
Range: .1 to 999 / Resolution: .1
*RST setting
10 seconds
Programming Example
OUTPUT 714;"SETUP:DAUDIO:TIMEOUT:STIME 6" !Sets the value to 6 seconds and the
SETup:DAUDio:TIMeout:TIME
Function
Selects/queries the timeout value used for Decoded Audio measurements when the timeout state
is ON. The units (S|MS) are optional, if no units are specified then units default to S.
Setting
Range: .1 to 999 / Resolution: .1
Query
Range: .1 to 999 / Resolution: .1
*RST setting
10 seconds
Programming Example
OUTPUT 714;"SETUP:DAUDIO:TIMEOUT:TIME 15" !Sets timeout value to 15 seconds.
!state to on.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_daudio.fm
"Decoded Audio Measurement
SETup:DAUDio
401