FETCh:BERRor
FETCh:BERRor[:ALL]?
Function
Queries the bit error measurement. Query returns integrity indicator, bits tested, bit error ratio,
and bit error count. (A similar query,
results but for all bit types simultaneously.) See
48.
Query
Integrity indicator
• Range: 0 to 16
• Resolution: 1
Bits tested
• Range: 0 to 999,131 and 9.91 E+37 (NAN)
• Resolution: 1
Bit error ratio
• Range: 0 to 100 and 9.91 E+37 (NAN)
• Resolution: 0.01
Bit error count
• Range: 1 to 999,131 and 9.91 E+37 (NAN)
• Resolution: 1
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:BERRor:BITS?
Function
Queries the number of bits actually tested. This query only returns the result of the bit type set
using the SETup:BERRor[:TYPE] command.
The number of bits actually tested will exceed the number requested because the test set rounds
up the number requested to the nearest number that results in an integral number of speech
frames. One speech frame is 132 bits. The test set measures complete a speech frame and it is
queried for bits. See
Query
Bits tested
• Range: 0 to 999,131 and 9.91 E+37 (NAN)
• Resolution: 1
*RST Setting
10,000
XXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
302
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_berror.fm
"FETCh:BERRor:FULL?" on page
"Bit Error Measurement Description" on page 48
305, returns the same
"Bit Error Measurement Description" on page