Agilent Technologies 8960 10 Series Reference Manual page 375

RFANalyzer:MANual:BAND
Function Sets/queries the frequency band that the test set will expect the mobile station to operate on.
This setting is used by the test set to map an expected channel (ARFCN) to an uplink frequency.
see "Receiver Control" on page 518
The receiver control is set to manual when a manual band is selected. see
"RFANalyzer:CONTrol:AUTO" on page 372
The manual band must be set before manual channel will update.
Setting Range: DCS|EGSM|PCS|PGSM
Query Range: DCS|EGSM|PCS|PGSM
*RST setting PGSM
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:BAND DCS" !Sets the band in manual
RFANalyzer:MANual:CHANnel[:SELected]
Function
Sets/queries the ARFCN that the mobile station is expected to transmit o for the band
selected. The test set will tune to the corresponding uplink frequency for the frequency band
currently selected. see
The manual band must be set before manual channel will update.
Setting
Any ARFCN within the currently selected frequency band.
Query
Any ARFCN within the currently selected frequency band.
*RST setting Sets the receiver control to auto
Band: PGSM
Traffic Channel: 30
Programming Example
OUTPUT 714;"RFANALYZER:MANUAL:SELECTED 512" !Configures the test set to
!receiver control.
"Receiver Control" on page 518
!ARFCN 512.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_rfanalyzer.fm
RFANalyzer
375