Agilent Technologies 8960 10 Series Reference Manual page 309

FETCh:DAUDio[:ALL]?
Function Queries integrity indicator and average decoded audio results. Values are returned in a
comma-separated list.
Query Integrity indicator:
• Range: 0 to 16
• Resolution: 1
Decoded audio:
• Range: 0 to 100%
• Resolution: 0.01% FS
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:DAUDio:ICOunt?
Function Queries the intermediate count of decoded audio multi-measurements completed.
This value is not displayed on the test set.
Query Range: 1 to 999
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:DAUDio:INTegrity?
Function Queries the integrity indicator for the last decoded audio measurement completed. Zero indicates
a normal measurement.
See "Integrity Indicator" on page 125
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:DAUDio:AMPLitude[:AVERage]?
Function Queries the average decoded audio result from an uplink speech level measurement in percent
full scale.
If the decoded audio multi-measurement count field is off, the level returned by this command is
displayed in the Decoded Audio Level field. If the decoded audio multi-measurement count is on,
the level returned by this query is displayed in the Average field
Query Range: 0 to 100%
Resolution: 0.01% FS
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
for descriptions of non-zero integrity indicators.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_daudio.fm
FETCh:DAUDio
309