Agilent Technologies 8960 10 Series Reference Manual page 420

SETup:ORFSpectrum
SETup:ORFSpectrum:TIMeout:STATe
Function Selects/queries output RF spectrum measurement timeout state.
Setting 0|OFF | 1|ON
Query 0|1
*RST Setting 0|off
Programming Example
OUTPUT 714;"SETUP:ORFSPECTRUM:TIMEOUT:STATE ON" !Sets timeout state to on.
SETup:ORFSpectrum:TRIGer:DELay
Function Sets/queries the trigger delay for output RF spectrum measurements. The units (S|MS|US|NS)
are optional, if no units are specified than units default to S.
Range: −2.31 ms to +2.31 ms
Range
Resolution: 5 significant digits or 100 nanoseconds whichever is greater
Range: −2.31 ms to +2.31 ms
Query
Resolution: 5 significant digits or 100 nanoseconds whichever is greater
*RST Setting 0 seconds
Programming Example
OUTPUT 714;"SETUP:ORFSPECTRUM:TRIGGER:DELAY 1MS" !Sets the trigger delay value
SETup:ORFSpectrum:TRIGger:SOURce
Function Selects/queries the trigger source for output RF spectrum measurements. See
Spectrum Measurement Description" on page
Setting Range: AUTO | IMMediate | PROTocol | RISE
See "Triggering of Measurements" on page
Query Range: AUTO | IMM | PROT | RISE
*RST Setting AUTO
Programming Example
OUTPUT 714;"SETUP:ORFSPECTRUM:TRIGGER:SOURCE AUTO" !Sets trigger source.
420
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_orfspectrum.fm
!to 1 millisecond.
75.
149.
"Output RF