Overview - Agilent Technologies 8960 10 Series Reference Manual

Overview

The SETup subsystem is used to configure measurement parameters. Each individual measurement
parameter can be set and queried using the associated SETup subsystem command. The general hierarchy of
the SETup subsystem command structure is as follows:
SETup:<meas-mnemonic>:<measurement parameter><parameter setting/value>
The following table shows the measurements available in the Agilent E1960A GSM mobile test application
and their associated <meas-mnemonic> used in the SETup command syntax.
Measurement Mnemonics Used In The SETup Subsystem
Measurement
Transmit Power
Power vs Time
Phase & Frequency Error
Output RF Spectrum
Bit Error
Fast Bit Error
Decoded Audio
Analog Audio
I/Q Tuning
Dynamic Power
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step3.fm
Step 3: Configure the Measurement Execution Parameters
<meas-mnemonic>
TXPower
PVTime
PFERror
ORFSpectrum
BERRor
FBERror
DAUDio
AAUDio
IQTuning
DPOWer
165