Returned values
The measurements returned by this program are:
• Integrity returns the measurement
measurement with no errors).
• Tx_pwr returns the transmit power in dBm.
• Max_swit_200,Max_swit_400 returns maximum ORFS power due to switching in dBm (one maximum
power level at a 200 kHz offset and one maximum power level at a 400 kHz offset).
• Bw_pwr returns the power level in a 30 kHz bandwidth at zero offset in dBm (this is the reference level for
ORFS power due to switching and ORFS power due to modulation).
• Avg_mod_200 returns the average ORFS power due to modulation in dBm (one average power level at a
200 kHz offset).
Related Topics
*******************************************************
"Output RF Spectrum Measurement Description" on page 75
"SETup:ORFSpectrum" on page 412
"INITiate" on page 355
"FETCh:ORFSpectrum" on page 322
"Comprehensive Program Example" on page 200
*******************************************************
"Integrity Indicator" on page 125
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_orfs_proc.fm
Programming an Output RF Spectrum Measurement
(0 means a successful
79