RFANalyzer
RFANalyzer:EXPected:POWer:PCS
Function
Sets/queries the power level in DBM that the mobile station is expected to transmit at. The
units DBM are optional. The test set will set up its input signal path to measure this power
level. see
Setting
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
Query
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
*RST setting
Sets the receiver control to auto
Band: PGSM
Expected Power: +13DBM
Programming Example
OUTPUT 714;"RFANALYZER:EXPECTED:POWER:PCS -10" !Sets expected power in PCS band
RFANalyzer:EXPected:POWer:PGSM
Function
Sets/queries the power level in DBM that the mobile station is expected to transmit at. The
units DBM are optional. The test set will set up its input signal path to measure this power
level. see
Setting
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
Query
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
*RST setting
Sets the receiver control to auto
Band: PGSM
Expected Power: +13DBM
Programming Example
OUTPUT 714;"RFANALYZER:EXPECTED:POWER:PGSM -10" !Sets expected power in PGSM
374
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_rfanalyzer.fm
"Receiver Control" on page 518
"Receiver Control" on page 518
!to -10 DBM.
!band to -10 DBM.