Agilent Technologies 8960 10 Series Reference Manual page 400

SETup:DAUDio
SETup:DAUDio:COUNt:STATe
Function Selects/queries the Decoded Audio multi-measurement count state.
Setting 1|ON | 0|OFF
Query 1|0
*RST setting 0 |OFF
Programming Example
OUTPUT 714;"SETUP:DAUDIO:COUNT:STATE OFF" !Sets trigger state for
SETup:DAUDio:FILTer [:SFREquency]
Function Sets/queries the center frequency for the 100 Hz bandpass filter applied to Decoded Audio
measurements. This command sets the count state to ON. The units (HZ|KHZ) are optional, if no
units are specified then units default to KHZ. see
page 55
Setting Range: 200 Hz to 3.6 kHz / Resolution: 1 HZ
Query Range: 200 Hz to 3.6 kHz / Resolution: 1 HZ
*RST setting 1000 HZ
Programming Example
OUTPUT 714;"SETUP:DAUDIO:FILTER:SFREQUENCY 2.2KHZ" !This is a complex command
SETup:DAUDio:FILTer:FREQuency
Function Sets/queries the center frequency for the 100 Hz bandpass filter applied to Decoded Audio
measurements. The units (HZ|KHZ) are optional, if no units are specified then units default to
KHZ. see
Setting Range: 200 Hz to 3.6 kHz / Resolution: 1 HZ
Query Range: 200 Hz to 3.6 kHz / Resolution: 1 HZ
*RST setting 1000 HZ
Programming Example
OUTPUT 714;"DAUDIO:FILTER:FREQUENCY 217HZ" !Sets bandpass filter frequency.
400
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_daudio.fm
"Decoded Audio Measurement Description" on page 55
!DAUDIO measurement.
"Decoded Audio Measurement Description" on
!that sets the value and the
!state to on.