Agilent Technologies 8960 10 Series Reference Manual page 373

Wireless communications test set, gsm mobile test application
Hide thumbs Also See for 8960 10 Series:
Table of Contents

Advertisement

RFANalyzer:EXPected:POWer:DCS
Function
Sets/queries the power level in DBM that the mobile station is expected to transmit at. The
units DBM are optional. The test set will set up its input signal path to measure this power
level. see
Setting
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
Query
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
*RST setting
Sets the receiver control to auto
Band: PGSM
Expected Power: +13DBM
Programming Example
OUTPUT 714;"RFANALYZER:EXPECTED:POWER:DCS -10" !Sets expected power in DCS band
RFANalyzer:EXPected:POWer:EGSM
Function
Sets/queries the power level in DBM that the mobile station is expected to transmit at. The
units DBM are optional. The test set will set up its input signal path to measure this power
level. see
Setting
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
Query
Range: -60 to +53 dBm, after the Amplitude Offset (optional) has been factored in. see
"Measurement Related Configuration" on page 563
Resolution: .01 DBM
*RST setting
Sets the receiver control to auto
Band: PGSM
Expected Power: +13DBM
Programming Example
OUTPUT 714;"RFANALYZER:EXPECTED:POWER:EGSM -10" !Sets expected power in EGSM
"Receiver Control" on page 518
"Receiver Control" on page 518
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_rfanalyzer.fm
!to -10 DBM.
!band to -10 DBM.
RFANalyzer
373

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E5515aE5515bE1960a

Table of Contents