Agilent Technologies 8960 10 Series Reference Manual page 324

FETCh:ORFSpectrum
FETCh:ORFSpectrum:ICOunt?
Function Queries the intermediate count of ORFS multi-measurements completed. This number will climb
to the number returned by
Query Range: 0 to 29971
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:ORFSpectrum:INTegrity?
Function Queries the integrity indicator for the output RF spectrum analyzer measurement. Zero indicates
a normal result.
See "Integrity Indicator" on page 125
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:ORFSpectrum:MODulation[:ALL]?
Function Queries TX Carrier Power, 30 kHz BW Power, and up to 22 comma-separated output RF
spectrum due to modulation (average) results
The "SETup:ORFSpectrum:MODulation:FREQuency[:OFFSet]"
output RF spectrum due to modulation offsets that are turned on and their frequency values. The
"SETup:ORFSpectrum:MODulation:FREQuency:POINts?"
output RF spectrum due to modulation points that are turned on, indicating the number of
output RF spectrum due to modulation (average) values to expect when you FETCh output RF
spectrum due to modulation results.
Query TX Carrier Power
• Range: −100 dBm to +100 dBm and 9.91 E+37
• Resolution: 0.01 dB
30 kHz Bandwidth Power
• Range: −100 dBm to +100 dBm and 9.91 E+37
• Resolution: 0.01 dB
Output RF Spectrum due to Modulation (Average)
• Range: −200 dB to +100 dB and 9.91 E+37
• Resolution: 0.01 dB
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
324
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_orfspectrum.fm
"SETup:ORFSpectrum:ICOunt:MAXimum?" on page
for descriptions of non-zero integrity indicators.
414.
command sets up the number of
command queries the number of