Agilent Technologies 8960 10 Series Reference Manual page 478

SYSTem:APPLication
SYSTem:APPLication:SELect[:NAME]
Function Selects a test application and reboots the test set. This will switch the test application to the
revision already selected. There is no need to re-select the revision before switching. The reboot
process takes about 1 minute.
Queries the test set for the test application that is selected and will run after the next reboot of
the test set.
NOTE
Setting Range: Any string up to 25 characters. This string is not case sensitive.
Query Range: Any string up to 25 characters including a null string.
AMPS/136 Mobile Test
GSM Mobile Test
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:NAME 'AMPS/136 MOBILE TEST'"
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
SYSTem:APPLication:SELect:REVision
Function Selects a test application revision. The revision does not need to be set in order to switch test
applications. The only time you select revisions is to change revisions.
Queries the test set for the test application revision that has been selected.
NOTE
Setting Range: Any string up to 20 characters. This string is not case sensitive.
Query Range: Any string up to 20 characters including null.
Programming Example
OUTPUT 714;"SYSTEM:APPLICATION:SELECT:REVISION 'GSM MOBILE TEST','A.04.00'"
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
478
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_system_app.fm
Selecting the correct name and the desired revision of a test application is
important. This information should be reviewed before proceeding. The directions
for how to determine test application name and revision are found in this
document.
GSM Mobile Test; revisions before A.04.00 did not have test application switching
and provide no way to return to revisions that have switching. Users will need to
reload a revision that has test application switching following the download
process for upgrading firmware.