Agilent Technologies 8960 10 Series Reference Manual page 357

INITiate:DONE?
Function Queries (one at a time) which measurements if any are available or have timed out.
See"Measurement Event Synchronization" on page 132
See "Measurement States" on page 150
See "INITiate:DONE:FLAG<measurement mnemonic>" on page 358
commands
Query Range: NONE| TXP | PVT | PFER | ORFS | AAUD | DAUD | DPOW | FBER | BERR | IQT
| WAIT
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
INITiate:DONE:CLEar
Function Clears the done flag from all measurements.
Programming Example
OUTPUT 714;"INITIATE:DONE:CLEAR" !clears done flag.
INITiate:DONE:FLAG[:ALL]
Function Specifies that all measurements are considered, (included or excluded) when the DONE? query is
sent.
If a measurements trigger arm, see
151, has been left in continuous mode, the done flag for that measurement will toggle between
DONE and WAIT, see
not be able to catch the measurement at the instant it is done, therefore the measurement will
never appear to be done. If a measurement trigger arm must be left in continuous mode the user
should (exclude) it, using this command, from the INITiate:DONE? query results.
Once the INITiate:DONE:FLAG has been set to EXCLude for a measurement, the user must
send the INCLude command for that measurement in oder to query that measurement with, the
INITiate:DONE? query. The test set will not reset any (excluded measurement) to be an (included
measurement) with any form of preset, see
Setting Range
• INCLude: include all measurements
• EXCLude: exclude all measurements
Programming Example
OUTPUT 714;"INITIATE:DONE:FLAG:ALL EXCLUDE" !Excludes all measurements from
to understand the test set's measurement states.
See"INITiate:DONE?" on page
"Trigger Arm (Single or Continuous) Description" on page
"INITiate:DONE?" on page
"Preset Descriptions" on page
!contributing the INITIATE:DONE?
!query, see "INITiate:DONE?" on
!page 6.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_initiate.fm
for how to use this command.
for include or exclude
132. The INITiate:DONE? query will probably
INITiate
357.
535.
357