Agilent Technologies 8960 10 Series Reference Manual page 316

FETCh:FBERror
FETCh:FBERror:COUNt?
Function Queries the number of information bits that were deemed errors during the last fast bit error
test.
This value is not available on the front panel display.
Query Range: 1 to 999,455 and 9.91 E+37 (NAN)
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:FBERror:DELay?
Function Queries the delay (in TDMA frames) the test set used during the last fast bit error measurement
to correlate uplink information bits with downlink information bits.
This value is displayed in the TDMA Frame Delay field.
This value can be determined automatically, or set by the user. See
"SETup:FBERror:MANual:DELay" on page 395
page 394
Refer also to the
delay and how it is used in the fast bit error measurement.
Query Range: 0 to 26 and 9.91 E+37
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:FBERror:ICOunt?
Function Queries the intermediate count (measurement progress report) of bits tested
Query Range: 0 to 999,455 and 99.9 E+37
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:FBERror:INTegrity?
Function Returns the integrity indicator value for the last fast bit error measurement performed. Zero
indicates a normal result.
See "Integrity Indicator" on page 125
Query Range: 0 to 16
Resolution: 1
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
316
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_fberror.fm
for setting this value manually.
"Fast Bit Error Measurement Description" on page 69
and "SETup:FBERror:LDControl:AUTO" on
for descriptions of non-zero integrity indicators.
for a description of frame