Agilent Technologies 8960 10 Series Reference Manual page 424

SETup:PFERror
SETup:PFERror:TIMeout:TIME
Function Sets/queries the timeout value in seconds that will be used for phase/frequency measurements
when the timeout state is ON. The units (S|MS) are optional, if no units are specified then unit
default to S.
Setting Range: .1 to 999
Resolution: .1
Query Range: .1 to 999
Resolution: .1
*RST Setting 10 seconds
Programming Example
OUTPUT 714;"SETUP:PFERROR:TIMEOUT:TIME 4" !Sets the timeout value to 4 seconds.
SETup:PFERror:TIMeout:STATe
Function Selects/queries the timeout state for a phase/frequency measurement.
Setting 0|OFF | 1|ON
Query 0|1
*RST Setting 0|off
Programming Example
OUTPUT 714;"SETUP:PFERROR:TIMEOUT:STATE ON" !Sets the timeout state to on for a
SETup:PFERror:TRIGger:DELay
Function Sets/queries the trigger delay time in seconds for a phase/frequency measurement. The units
(S|MS|US|NS) are optional, if no units are specified then units default to S.
See "Phase and Frequency Error Measurement Description" on page 82
Range: −2.31 ms to +2.31 ms
Setting
Resolution: 5 significant digits or 100 ns, whichever is greater
Range: −2.31 ms to +2.31 ms
Query
Resolution: 5 significant digits or 100 ns, whichever is greater
*RST Setting 0 seconds
Programming Example
OUTPUT 714;"SETUP:PFERROR:TRIGGER:DELAY 1.2MS" !Sets trigger delay time to
424
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_pferror.fm
!Phase/Frequency measurement.
!1.2 milli-seconds