Agilent Technologies 8960 10 Series Reference Manual page 344

FETCh:PVTime
FETCh:PVTime:POWer[:ALL]:AVERage?
Function Queries the average power levels, from a number of multi-measurements, at each user-settable
time offset that is currently turned on. Results are relative to the power versus time carrier
power measurement.
The "SETup:PVTime:TIME[:OFFSet]"
and their time values. The
that are turned on, indicating the number of values to expect when you send this command.
Range: −100 dBc to +10 dBc and 9.91 E+37 (NAN)
Query
Resolution: 0.01 dB
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
FETCh:PVTime:POWer[:ALL]:SDEViation?
Function Queries the standard deviation, from a number of multi-measurements, at each user-settable
time offset that is currently turned on.
The "SETup:PVTime:TIME[:OFFSet]"
and their time values. The
that are turned on, indicating the number of values to expect when you send this command.
Query Range: 0 dBc to +100 dBc and 9.91 E+37 (NAN)
Resolution: 0.001 dB
XXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
344
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_fetch_pvtime.fm
command sets up the number of offsets that are turned on
"SETup:PVTime:TIME:POINts?"
command sets up the number of offsets that are turned on
"SETup:PVTime:TIME:POINts?"
queries the number of offset points
queries the number of offset points