Agilent Technologies 8960 10 Series Reference Manual page 288

CALL:TCHannel
CALL:TCHannel[:ARFCn]:EGSM
Function Sets/queries channel number for downlink and uplink TCH for EGSM band. See
Traffic Channel (TCH)" on page
TCH ARFCN may be set and queried when the CALL:STATUS:STATE is idle or connected, see
"CALL:STATus[:STATe]?" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
"Call Processing Subsystem Overlapped Command Synchronization Commands" on page 31
examples.
Setting range: 0 to 124 | 975 to 1023 (default: 30)
resolution: 1
Query range: 0 to 124 | 975 to 1023
resolution: 1
*RST Setting 30 (PGSM band)
Programming Example
OUTPUT 714;"CALL:TCHANNEL:ARFCN:EGSM 124"
CALL:TCHannel[ARFCN]:PCS
Function Sets/queries channel number for downlink and uplink TCH for PCS band. See
Traffic Channel (TCH)" on page
TCH ARFCN may be set and queried when the CALL:STATUS:STATE is idle or connected, see
"CALL:STATus[:STATe]?" on page
Additional commands can be appended to aid in controller/Mobile Station synchronization. See
"Call Processing Subsystem Overlapped Command Synchronization Commands" on page 31
examples.
Setting range: 512 to 810 (default: 698)
resolution: 1
Query range: 512 to 810
resolution: 1
*RST Setting 30 (PGSM band)
Programming Example
OUTPUT 714;"CALL:TCHANNEL:ARFCN:PCS 512"
288
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_tchannel.fm
521.
283.
521.
283.
"Configuring the
for
"Configuring the
for