SETup:AAUDio:FILTer:STATe
Function
Selects/queries the state of the Analog Audio bandpass filter. see
Setting
1|ON |0 |OFF
Query
1 | 0
*RST setting
0|OFF
Programming Example
OUTPUT 714;"SETUP:AAUDIO:FILTER:STATE ON" !Sets filter state on.
SETup:AAUDio:TIMEout[:STIME]
Function
Selects/queries the timeout value in seconds that will be used for Analog Audio measurements
and sets the timeout state to ON. Units (S|MS) are optional, if no units are specified then units
default to S.
Setting
Range: .1 to 999 / Resolution: .1
Query
Range: .1 to 999 / Resolution: .1
*RST setting
10
Programming Example
OUTPUT 714;"SETUP:AAUDIO:TIMEOUT:STIME 3" !A complex command that sets timeout
SETup:AAUDio:TIMEout:STATe
Function
Selects/queries the Analog Audio measurement timeout state.
Setting
1|ON|0|OFF
Query
1 | 0
*RST setting
0|OFF
Programming Example
OUTPUT 714;"SETUP:AAUDIO:TIMEOUT:STATE ON" !Sets timeout state to on.
!state to on and sets the
!timeout value.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_aaudio.fm
"SETup:AAUDio" on page 380
SETup:AAUDio
383