Diagram Conventions; Diagram Description - Agilent Technologies 8960 10 Series Reference Manual

Diagram Conventions

July 7, 1999
AFGenerator
:FREQuency
Root Element
Root
Element
Node
:VOLTage
See Complex Command
Description below.
Blue indicates the
command is a hypertext
link to the command's
description table.

Diagram Description

Statement elements are connected by lines. Each line can be followed in only one direction, as indicated by the
arrow at the end of the line. Any combination of statement elements that can be generated by starting at the
Root Element and following the line the proper direction is syntactically correct. The drawings show the
proper use of spaces. Where spaces are required they are indicated by <sp>, otherwise no spaces are allowed
between statement elements.
Complex Command Description
A complex command sets the state of the parameter to ON, and is used to set a value for that parameter. These
parameters; amplitude, frequency, gain, number, time, and value can be used as a complex command. Refer to
the specific command for the parameter that applies.
Underline of command
indicates the command is not in
your unit, therefore any
associated commands in the
proper direction are also not.
[:SAMPlitude]
:AMPLitude
:STATe
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_Syntax_Book_Diagr_Convent.fm
<sp><num value>[HZ|KHZ|MHZ|GHZ]
space Bold
required default
setting
?
Brackets around command indicates
the command is optional.
<sp><num value>[V|MV]
?
<sp><num value>[V|MV]
?
<sp>1|ON|0|OFF
? (returns 1|0)
Diagram Conventions
Slash between
commands
signifies OR . Use
one command OR
another.
213