Agilent Technologies 8960 10 Series Reference Manual page 399

SETup:DAUDio:CONTinuous
Function Selects/queries the trigger state for Decoded Audio measurements.
Setting Continuous 1|ON|Single 0|OFF
Query 1|0
*RST setting 0|single
Programming Example
OUTPUT 714;"SETUP:DAUDIO:CONTINUOUS OFF" !Set DAUDIO measurement to single
SETup:DAUDio:COUNt[:SNUMber]
Function Selects/queries the number of Decoded Audio multi-measurements the Test Set will make. This
command sets the count state to ON.
Setting Range: 1 to 999 / Resolution: 1
Query Range: 1 to 999 / Resolution: 1
*RST setting 10
Programming Example
OUTPUT 714;"SETUP:DAUDIO:COUNT:SNUMBER 10" !Sets the value to 10 and the state
SETup:DAUDio:COUNt:NUMBer
Function Selects/queries the number of Decoded Audio measurements the test set will make when the
multi-measurement count state is on.
Setting Range: 1 to 999 / Resolution: 1
Query Range: 1 to 999 / Resolution: 1
*RST setting 10
Programming Example
OUTPUT 714;"SETUP:DAUDIO:COUNT:NUMBER 25" !Sets the number of DAUDIO
!trigger mode.
!to on.
!measurements that will be made.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_setup_daudio.fm
SETup:DAUDio
399