Call:burst - Agilent Technologies 8960 10 Series Reference Manual

CALL:BURSt

CALL :BURSt:TYPE
"Diagram Conventions" on page 213
CALL:BURSt:TYPE
Function Sets/queries the Expected Burst parameter. This parameter is used for measurement
synchronization when the test set's operating mode is set to Test Mode or the Cell Activated state
is set to Off. (If it is not set, the test set may not synchronize to the input signal's midamble.) For
more details on this parameter, see
Setting range: RACH|TSC0|TSC1|TSC2|TSC3|TSC4|TSC5|TSC6|TSC7
Query range: RACH|TSC0|TSC1|TSC2|TSC3|TSC4|TSC5|TSC6|TSC7
*RST Setting TSC5
Related Topics "Test Mode Operating Mode" on page
Programming Example
OUTPUT 714;"CALL:BURST:TYPE TSC2" !Sets the test set to expect a TCH with midamble
<sp>RACH|TSC0|TSC1|TSC2|TSC3|TSC4|TSC5|TSC6|TSC7
?
"Expected Burst" on page
524.
!pattern TSC2.
S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_call_burst.fm
526.
CALL:BURSt
239