Configuring Acli Logging - Avaya 8800 Troubleshooting Manual

Log configuration using the ACLI
sys force-msg <WORD 4-4>
Variable definitions
Use the information in the following table to help you use this command.
<WORD 4-4>

Configuring ACLI logging

When enabled, ACLI logging keeps track of all command line interface commands executed
on the switch. Use ACLI logging for fault management purposes.
Prerequisites
• Access Global Configuration mode.
Procedure steps
1. To enable ACLI logging, enter the following command:
2. To change the maximum file size used for ACLI logs:
3. Ensure that the configuration is correct:
332 Troubleshooting
Variable
clilog enable
clilog maxfilesize <64 to 256000>
Comments? infodev@avaya.com
Value
Used to add a forced message control pattern,
<WORD 4-4>
where is a string of 4 characters. You
can add a four-byte pattern into the force-msg table.
The software and the hardware log messages that
use the first four bytes matching one of the patterns
in the force-msg table undergo the configured
message control action. You can specify up to 32
different patterns in the force-msg table. This
includes a wildcard pattern (****) as well. Upon
specifying the wildcard pattern, all messages
undergo message control.
July 2013