Avaya 8800 Troubleshooting Manual page 163

config diag pcap
config diag pcap
capture-filter
<listid>
Troubleshooting
Command Parameter
remove set <value>
remove-acl-filter <acl-id>
auto-save <true|false> [file-name
<value>] [device <value>] [ip
<value>]
buffer-size <2...256> or <2...420>
buffer-wrap <true|false>
enable <true|false>
fragment-size <64...9600>
info
pcmcia-wrap <true|false>
reset-stat
action <capture|drop|trigger-on|
trigger-off>
create
delete
dscp <dscp> [to <value>] [match-zero
<value>] [not]
dstip <ipaddr> [to <value>] [not]
dstmac <DstMac> [mask <value>] [not]
enable <true|false>
ether-type <Ethertype> [to <value>]
[not]
info
packet-count <PacketCount>
pbits <Pbits> [to <value>] [match-
zero <value>] [not]
protocol-type <protocoltype> [to
<value>] [not]
refresh-timer <RefreshTimer>
srcip <ipaddr> [to <value>] [not]
srcmac <SrcMac> [mask <value>] [not]
PCAP configuration
July 2013 163