Configuring Port Mirroring - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using Enterprise Device Manager
3. ClickGeneral.
4. In the Action section, select flushAll.
5. Click Apply.

Configuring port mirroring

Use port mirroring to aid in diagnostic and security operations.
Connect the sniffer (or other traffic analyzer) to the output port you specify with the
MirroringPort parameter.
To change a port mirroring configuration, first disable mirroring.
Procedure steps
1. In the navigation tree, open the following folders Configuration > Edit >
2. Click General.
3. Click the Port Mirrors tab.
4. Click Insert.
5. Use the following variable definitions tables to configure mirroring as required.
6. To enable port mirroring for the instance, select Enable.
7. Click Insert.
Variable definitions
Use the information in the following table to help you use the Port Mirrors tab.
Id
MirroredPortList
MirroringPortList
80 Troubleshooting
In a port context, all entries associated with the port are flushed. You can flush the
ARP entries and IP routes for a port. After you flush a routing table, it is not
automatically repopulated. The repopulation time delay depends on the routing
protocols in use.
Diagnostics.
Variable
Comments? infodev@avaya.com
Specifies an assigned identifier for the configured port
mirroring instance.
Specifies the port or ports to be mirrored (the source
ports).
Specifies the destination port or ports (the ports to which
the mirrored packets are forwarded). Used to configure
the mirroring ports.
Value
July 2013