Example Of Configuring An Snmp Host; Configuring Snmp Target Table Parameters - Avaya 8800 Troubleshooting Manual

[filter <WORD 1-32>]
[target-name <WORD
1-32>]

Example of configuring an SNMP host

Procedure steps
Configure the target table entry:
snmp-server host 198.202.188.207 port 162 v2c ReadView inform
retries 3
snmp-server host 198.202.188.207 port 162 v2c ReadView inform
mms 484
snmp-server host 198.202.188.207 port 162 v2c ReadView inform
timeout 1500

Configuring SNMP target table parameters

In ACLI, the target table parameters (security name, model) are configured as part of the SNMP
host configuration. For more information, see
Troubleshooting
Variable
Configuring SNMP target table parameters
Value
{noAuthnoPriv|authNoPriv|AuthPriv}
•
specifies the security level.
• <WORD 1-32> specifies the security name, which
identifies the principal that generates SNMP
messages.
• inform indicates that SNMP notifications should be
sent as inform (rather than trap).
• retries <0-255>
with a range of 0 to 255.
• timeout <0-2147483647>
timeout value in seconds with a range of 0 to
214748364.
filter <WORD 1-32>
•
to use.
• target-name <WORD 1-32> is the target name with
a string length of 1 to 32.
Configuring an SNMP host
specifies the retry count value
specifies the
specifies the filter profile
on page 313.
July 2013 315