Avaya 8800 Troubleshooting Manual page 233

2. Stop debug trace message output.
3. Display trace messages forwarded by the switch.
4. Display trace messages received by the switch.
5. Display Hello messages forwarded and received by the switch.
6. Display and log debug trace messages.
7. Disable previously enabled register messages.
8. Display debug trace messages from a specific interface.
Variable definitions
Use the information in the following table to use the debug ip pim commands.
assert
bstrap
group <A.B.C.D>
hello
joinprune
pimdbglog
pimdbgtrace
rcv-dbg-trace
register
regstop
Troubleshooting
debug ip pim pimdbgtrace
no debug ip pim pimdbgtrace
debug ip pim send
debug ip pim rcv-dbg-trace
debug ip pim hello
debug ip pim pimdbglog
debug ip pim register
debug ip pim source <A.B.C.D>
Variable Value
Displays the assert debug traces.
Displays bootstrap debug traces.
Displays debug traces from a specific group IP
address.
Displays hello debug traces.
Displays join/prune debug traces.
Enables or disables whether the switch logs debug
traces.
Enables or disables PIM debug traces.
Displays trace messages received by the switch.
Displays register debug traces.
Displays register stop debug traces.
Using PIM debugging commands
July 2013 233