Determining The Data Stream Learned When Ip Multicast Over Spbm Is Configured On The Vlan - Avaya 8800 Troubleshooting Manual

Multicast troubleshooting using EDM
FlushAction
RouterAlertEnable
SsmSnoopEnable
SnooopQuerierEnable
SnoopQuerierAddr
MvrEnable
MvrProxyEnable
McastMode
Determining the data stream learned when IP multicast over
SPBM is configured on the VLAN
To determine the data stream learned when IP multicast is configured on the VLAN, use the
following procedure:
394 Troubleshooting
Field
messages. Use this value to modify the leave latency
of the network. A reduced value results in reduced
time to detect the loss of the last member of a group.
This does not apply if igmpInterface version is 1.
Configures the flush action to one of the following:
• none
• flushGrpMem
• flushMrouter
• flushSender
Indicates whether the router alert is enabled or
disabled
Indicates whether SSM Snoop is enabled (true) or
disabled (false)
Indicates whether the snoop querier is enabled (true)
or disabled (false)
Indicates the snoop querier IP address
Indicates whether MVR is enabled (true) or disabled
(false)
Indicates whether the MVR proxy is enabled (true) or
disabled (false)
Indicates the multicast mode.
Comments? infodev@avaya.com
Description
July 2013