Avaya 8800 Troubleshooting Manual page 393

Variable definitions
Use the information in the following table to help you understand the fields in the Interface
tab.
IfIndex
QueryInterval
Mode
Status
Version
OperVersion
Querier
QueryMaxResponseTime
WrongVersionQueries
Joins
Robustness
LastMembQueryIntvl
Troubleshooting
Field
Indicates the interfaces where IGMP is configured
Indicates the frequency at which the interface
transmits IGMP host query packets
Specifies the protocol used on the added VLAN. The
value is snoop, snoop-spbm, routed-spb or pim.
Indicates the activation of a row that enables IGMP on
the interface. The destruction of a row disables IGMP
on the interface.
Indicates the version of IGMP that is running on this
interface. This object configures a router capable of
running either version. For IGMP to function correctly,
you must configure all routers on a LAN to run the
same version of IGMP.
Indicates the operational version of IGMP
Indicates the address of the IGMP querier on the IP
subnet to which this interface is attached
Indicates the maximum query response time (in tenths
of a second) advertised in IGMPv2 queries on this
interface
Indicates the number of queries received whose IGMP
version does not match the igmpInterface version. You
must configure all routers on a LAN to run the same
version of IGMP. Therefore, if the interface receives
queries with the wrong version, a configuration error
occurs..
Indicates the number of times IGMP added a group
membership on this interface
Indicates the robustness variable, which you configure
for the expected packet loss on a subnet. If packet loss
is expected on a subnet, increase the robustness
variable.
Indicates the maximum response time (in tenths of a
second) inserted into group-specific queries sent in
response to leave group messages, and is also the
amount of time between group-specific query
Determining the protocol configured on the added VLAN
Description
July 2013 393