Copying Captured Packets To A Remote Machine - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using ACLI
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
1. Log on to the Secondary SF/CPU.
2. Use the following command:

Copying captured packets to a remote machine

You can copy packets to a remote machine, or the switch flash or PCMCIA (or external flash
on the 8895 SF/CPU). If PCAP is used with autosave disabled, captured packets are stored
in the Secondary SF/CPU DRAM buffer.
Prerequisites
• Access Privileged EXEC mode.
Procedure steps
To copy the packets to a file for later viewing, use the copy or FTP get commands.
These commands can be executed in the Primary CPU.
copy PCAP00 <WORD 1-99>
OR
ftp> get PCAP00 <WORD 1-99>
For example:
copy PCAP00 /pcmcia/file.cap
Variable definitions
Use the information in the following table to help you perform this procedure.
254 Troubleshooting
show pcap dump
Comments? infodev@avaya.com
July 2013