Configuring Ip Interface Khi - Avaya 8800 Troubleshooting Manual

Software troubleshooting tool configuration using ACLI

Configuring IP interface KHI

IP Interface KHI provides the total configured and total operational IP interface count. It also
provides a history of the last 10 IP Interface Up/Down events. As the memory used for IP
Interface KHI information is minimal, it has minimal impact on the system.
The IP Interface Count is calculated when the show command is executed. The KHI uses the
existing IP Interface Up/Down state transition to keep track of the IP Interface Operational
Count and also to maintain the historical data.
The clear command allows you to establish a reference count and last clear timestamps.
To ensure the validity of the KHI information, ensure that it is in sync with the output from the
IP interface show commands, and verify that the timestamps are relevant.
To configure IP Interface KHI, use the following procedure.
Prerequisites
• Log on to Global Configuration mode.
Procedure steps
1. To enable the IP interface KHI feature, enable KHI globally by entering:
2. To display the IP interface KHI information, enter:
3. To clear the IP interface KHI statistics, enter:
Variable definitions
[no]
224 Troubleshooting
[no] khi enable
show khi ip-interface
clear khi ip
Variable
Comments? infodev@avaya.com
Value
Disables the specified KHI feature.
July 2013