Configuring Logging - Avaya 8800 Troubleshooting Manual

Log configuration using the ACLI
logging
logging transferFile <1-10>
sys msg-control
sys force-msg <WORD 4-4>

Configuring logging

You can configure log file parameters, as well as write, or clear the log file automatically created
by the system.
Prerequisites
• Access Global Configuration mode.
Procedure steps
1. Define which messages are logged:
2. Write the log file from memory to a file:
3. Use the following table to help you configure other parameters as required.
324 Troubleshooting
Command
logging level <0-4>
logging write <WORD 1-1536>
Comments? infodev@avaya.com
Parameter
level <0-4>
logToPCMCIA
screen
write <WORD 1-1536>
address <A.B.C.D>
filename <WORD 0-255>
<cr>
action <suppress-msg|send-trap|
both>
control-interval <1-30>
max-msg-num <2-500>
July 2013