Avaya 8800 Troubleshooting Manual page 91

DstMacMask
IsInverseDstMac
VlanId
ToVlanId
IsInverseVlanId
Pbit
ToPbit
IsInversePbit
PbitMatchZero
EtherType
ToEtherType
IsInverseEtherType
SrcIp
ToSrcIp
IsInverseSrcIp
DstIp
ToDstIp
IsInverseDstIp
Dscp
ToDscp
IsInverseDscp
Troubleshooting
Variable
Specifies the destination MAC address mask that
specifies an address range.
Specifies the destination MAC address inverse. When
set, all MAC addresses other than the one specified are
matched.
Specifies the VLAN ID of the packet to match.
Specifies the destination VLAN ID; used to specify a
range.
Specifies the VLAN ID inverse. When set, all VLAN IDs
other than the one specified are matched.
Specifies the 802.1p-bit of the packet to be matched.
Specifies an 802.1p-bit range.
Specifies the p-bit inverse. When set, all p-bits other than
the one specified are matched.
When selected, 0 is considered a valid p-bit value.
Packets with a p-bit of 0 can be captured. Otherwise, 0
is considered a disable value.
Specifies the EtherType of the packet to match.
Specifies an EtherType range.
Specifies the EtherType inverse. When set, all
EtherTypes other than the one specified are matched.
Specifies the source IP address of the packet to match.
Specifies a source IP address range.
Specifies the source IP address inverse. When set,
source IP addresses other than the one specified are
matched.
Specifies the destination IP address of the packet to
match.
Specifies the destination IP address range.
Specifies the Destination IP address inverse. When set,
all addresses other than the one specified are matched.
Specifies the DiffServ Codepoint (DSCP) of the packet
to match.
Specifies a DSCP range.
Specifies the DSCP inverse. When set, all DSCPs other
than the one specified are matched.
Configuring PCAP filters
Value
July 2013 91