Software troubleshooting tool configuration using CLI
2. To configure the boot delay, enter:
3. To display high-level KHI information, enter:
4. To display all KHI information, enter:
5. To clear all KHI statistics, enter:
6. To clear the KHI log, enter
Variable definitions
Variable
<true|false>
<minutes>
[file <value>]
[history]
Configuring management KHI
Use this procedure to configure management KHI.
Management KHI tracks TCP connections, CLI users, and KHI log status.
Procedure steps
1. To enable the KHI feature globally, enter:
2. To enable the management KHI feature, enter:
130
Troubleshooting
config sys set khi khi-enable <true|false>
config sys set khi boot-delay <minutes>
show khi info
show khi show-all [file <value>]
clear khi all
clear khi log
Enables or disables the specified KHI feature.
Specifies the boot delay period, in minutes.
If the filename is specified, the system stores the output to a
file. Otherwise, it displays the output to the console. If you
specify a filename but omit the directory, the system stores
the output to the PCMCIA directory by default.
Displays the event history (max 10).
config sys set khi khi-enable <true|false>
Comments? infodev@avaya.com
Value
July 2013