Viewing Pgm Interface Errors - Avaya 8800 Troubleshooting Manual

Multicast troubleshooting using CLI
Table 20: show ip igmp snoop-trace command
Field
GROUP ADDRESS
SOURCE ADDRESS
IN VLAN
TYPE
IN PORT
OUT VLAN
OUT PORT

Viewing PGM interface errors

Display general information about PGM errors that occurred on the selected interface.
Procedure steps
Show PGM interface errors using the following command:
show ip pgm interface error general
Job aid: show ip pgm interface error general command
The following table describes fields for this command.
Table 21: show ip pgm interface error general parameters
Field
CCT
IN_SPM PORT ERRORS Displays the number of SPMs discarded because they were
398 Troubleshooting
Indicates the IP multicast group address for which this entry
contains information.
Indicates the source of the multicast traffic.
Indicates the incoming VLAN ID.
Specifies where the data stream is learned from (ACCESS or
NETWORK). ACCESS indicates that the data stream is learned
from the UNI ports. NETWORK shows that is learned from the
SPBM cloud. This field is only shown with Layer 2 VSN
constrained streams.
Indicates the incoming port number.
Indicates the outgoing VLAN ID.
Indicates the outgoing port number.
Displays the circuit number of the selected interface
received on the wrong interface
Comments? infodev@avaya.com
Description
Description
July 2013