Avaya 8800 Troubleshooting Manual page 155

Figure 3: Port mirroring setup
Procedure steps
1. Create a new ACT to filter on ICMP frames and TCP destination ports. Configure a
2. Select the IP attributes of the IP protocol type:
3. Select the protocol attributes of TCP source port, TCP destination port, and UDP
Troubleshooting
new ACT with ID = 2:
ERS-8610:5# config filter act 2 create
ERS-8610:5# config filter act 2 ip ipProtoType
destination port:
Port mirroring configuration
July 2013 155